二供

TimedUpload/QuartzJobs/SecondaryPumpDataUploadJob.cs

@@ -86,36 +86,68 @@ namespace TimedUpload.QuartzJobs
 
                 string newSecondaryToDMACode = Constants.SecondaryToDMACode;
                 // 处理设备列表
+                #region
                 // for (int i = 0; i < dtDevice.Rows.Count; i++)
                 // {
-                    //DataRow dr = dtDevice.Rows[i];
-                    string id = "2023/1/17 15:37";//dr["更新时间"].ToString();
-                    string deviceCode = "wwkj006";// dr["编码"].ToString();
-                    string PressureIn = "0";//dr["泵进口压力"].ToString();
-                    string PressureOut = "10.802";//dr["泵出口压力"].ToString();
-                    string PressureSet = "0";//dr["泵设定压力"].ToString();
-                    string InstantFlow = "0";//dr["瞬时流量"].ToString();
-                    string TotalFlow = "0";//dr["净累计流量"].ToString();
-                    string PositiveToTalFlow = "0";//dr["正累计流量"].ToString();
-                    string NegativeTotalFlow = "0";//dr["负累计流量"].ToString();
-                    string PH = "0";//dr["PH"].ToString();
-                    string Chlorine = "0";//dr["余氯"].ToString();
-                    string Turbidity = "0";//dr["浊度"].ToString();
-                    string LiquidHeight = "0";//dr["水箱液位"].ToString();
-                    string VoltageA = "0";//dr["电压AB"].ToString();
-                    string VoltageB = "0";//dr["电压AC"].ToString();
-                    string VoltageC = "0";//dr["电压BC"].ToString();
-                    string CurrentA = "0";//dr["电流A"].ToString();
-                    string CurrentB = "0";//dr["电流B"].ToString();
-                    string CurrentC = "0";//dr["电流C"].ToString();
-                    string Consumption = "0";//dr["用电量"].ToString();
-                    string LackWater ="0";//dr["缺水报警"].ToString();
-                    string OverPressure = "0";//dr["超压报警"].ToString();
-                    string HouseInlet = "1";//dr["进水报警"].ToString(); // 进水报警0为正常，1为进水。
-                    string TubeBurst = "0";//dr["爆管报警"].ToString();
-                    string NetState = "0";//dr["网络状态"].ToString(); // 0代表通讯正常，1代表网络故障，2代表现场485设备通讯故障
-
-                    string readTime = "2023/1/17 15:37:14";//dr["日期"].ToString().Trim() + " " + dr["时间"].ToString().Trim();
+                //DataRow dr = dtDevice.Rows[i];
+                //string id = "2023/1/17 15:37";//dr["更新时间"].ToString();
+                //string deviceCode = "wwkj006";// dr["编码"].ToString();
+                //string PressureIn = "0";//dr["泵进口压力"].ToString();
+                //string PressureOut = "10.802";//dr["泵出口压力"].ToString();
+                //string PressureSet = "0";//dr["泵设定压力"].ToString();
+                //string InstantFlow = "0";//dr["瞬时流量"].ToString();
+                //string TotalFlow = "0";//dr["净累计流量"].ToString();
+                //string PositiveToTalFlow = "0";//dr["正累计流量"].ToString();
+                //string NegativeTotalFlow = "0";//dr["负累计流量"].ToString();
+                //string PH = "0";//dr["PH"].ToString();
+                //string Chlorine = "0";//dr["余氯"].ToString();
+                //string Turbidity = "0";//dr["浊度"].ToString();
+                //string LiquidHeight = "0";//dr["水箱液位"].ToString();
+                //string VoltageA = "0";//dr["电压AB"].ToString();
+                //string VoltageB = "0";//dr["电压AC"].ToString();
+                //string VoltageC = "0";//dr["电压BC"].ToString();
+                //string CurrentA = "0";//dr["电流A"].ToString();
+                //string CurrentB = "0";//dr["电流B"].ToString();
+                //string CurrentC = "0";//dr["电流C"].ToString();
+                //string Consumption = "0";//dr["用电量"].ToString();
+                //string LackWater ="0";//dr["缺水报警"].ToString();
+                //string OverPressure = "0";//dr["超压报警"].ToString();
+                //string HouseInlet = "1";//dr["进水报警"].ToString(); // 进水报警0为正常，1为进水。
+                //string TubeBurst = "0";//dr["爆管报警"].ToString();
+                //string NetState = "0";//dr["网络状态"].ToString(); // 0代表通讯正常，1代表网络故障，2代表现场485设备通讯故障
+
+                //string readTime = "2023/1/17 15:37:14";//dr["日期"].ToString().Trim() + " " + dr["时间"].ToString().Trim();
+                #endregion
+                for (int i = 0; i < dtDevice.Rows.Count; i++)
+                {
+                    DataRow dr = dtDevice.Rows[i];
+                    string id = dr["更新时间"].ToString();
+                    string deviceCode = dr["编码"].ToString();
+                    string PressureIn = dr["泵进口压力"].ToString();
+                    string PressureOut = dr["泵出口压力"].ToString();
+                    string PressureSet = dr["泵设定压力"].ToString();
+                    string InstantFlow = dr["瞬时流量"].ToString();
+                    string TotalFlow = dr["净累计流量"].ToString();
+                    string PositiveToTalFlow = dr["正累计流量"].ToString();
+                    string NegativeTotalFlow = dr["负累计流量"].ToString();
+                    string PH = dr["PH"].ToString();
+                    string Chlorine = dr["余氯"].ToString();
+                    string Turbidity = dr["浊度"].ToString();
+                    string LiquidHeight = dr["水箱液位"].ToString();
+                    string VoltageA = dr["电压AB"].ToString();
+                    string VoltageB = dr["电压AC"].ToString();
+                    string VoltageC = dr["电压BC"].ToString();
+                    string CurrentA = dr["电流A"].ToString();
+                    string CurrentB = dr["电流B"].ToString();
+                    string CurrentC = dr["电流C"].ToString();
+                    string Consumption = dr["用电量"].ToString();
+                    string LackWater = dr["缺水报警"].ToString();
+                    string OverPressure = dr["超压报警"].ToString();
+                    string HouseInlet = dr["进水报警"].ToString(); // 进水报警0为正常，1为进水。
+                    string TubeBurst = dr["爆管报警"].ToString();
+                    string NetState = dr["网络状态"].ToString(); // 0代表通讯正常，1代表网络故障，2代表现场485设备通讯故障
+
+                    string readTime = dr["日期"].ToString().Trim() + " " + dr["时间"].ToString().Trim();
 
                     Dictionary<string, object> deviceMap = new Dictionary<string, object>();
                     deviceMap["DeviceCode"] = deviceCode;
@@ -145,7 +177,7 @@ namespace TimedUpload.QuartzJobs
                     deviceMap["NetState"] = NetState; 
                     ArrayList meterDataList = new ArrayList();
                     // 处理泵的数据
-                    for (int j = 1; j < 1; j++)
+                    for (int j = 1; j < 4; j++)
                     {
                         Dictionary<string, object> meterMap = new Dictionary<string, object>();
                         string colPre = "";
@@ -162,27 +194,27 @@ namespace TimedUpload.QuartzJobs
                                 break;
                         }
 
-                        //string meterCode = "wwkj" + j.ToString().PadLeft(3, '0');
-                        //string frequency = dr[colPre + "频率"].ToString();
-                        //string current = dr[colPre + "电流"].ToString();
-                        //string runState = dr[colPre + "运行状态"].ToString();
-                        //string power = dr[colPre + "功率"].ToString();
-                        //string voltage = dr[colPre + "电压"].ToString();
-
-                        //meterMap["PumpCode"] = meterCode;
-                        //meterMap["ReadTime"] = readTime;
-                        //meterMap["Frequency"] = frequency;
-                        //meterMap["Current"] = current;
-                        //meterMap["RunState"] = runState;
-                        //meterMap["Power"] = power; 
-                        //meterMap["Voltage"] = voltage; 
+                        string meterCode = "wwkj" + j.ToString().PadLeft(3, '0');
+                        string frequency = dr[colPre + "频率"].ToString();
+                        string current = dr[colPre + "电流"].ToString();
+                        string runState = dr[colPre + "运行状态"].ToString();
+                        string power = dr[colPre + "功率"].ToString();
+                        string voltage = dr[colPre + "电压"].ToString();
+
+                        meterMap["PumpCode"] = meterCode;
+                        meterMap["ReadTime"] = readTime;
+                        meterMap["Frequency"] = frequency;
+                        meterMap["Current"] = current;
+                        meterMap["RunState"] = runState;
+                        meterMap["Power"] = power;
+                        meterMap["Voltage"] = voltage;
                         meterDataList.Add(meterMap);
                     }
 
-                    //if (meterDataList.Count == 0) 
-                    //{
-                    //    continue;
-                    //}
+                    if (meterDataList.Count == 0)
+                    {
+                        continue;
+                    }
                     deviceMap["PumpData"] = meterDataList;
 
 
@@ -197,26 +229,26 @@ namespace TimedUpload.QuartzJobs
                     }
 
                     // 判断数据是否需要同步分区计量
-                    //if ("1".Equals(Constants.SecondaryToDMA))
-                    //{
-                    //    string deviceCodeTemp = SecondaryToDMA(dr, channels, properties, newSecondaryToDMACode);
+                    if ("1".Equals(Constants.SecondaryToDMA))
+                    {
+                        string deviceCodeTemp = SecondaryToDMA(dr, channels, properties, newSecondaryToDMACode);
 
 
-                    //    if ("".Equals(newSecondaryToDMACode))
-                    //    {
-                    //        newSecondaryToDMACode = deviceCodeTemp;
-                    //    }
-                    //    else
-                    //    {
+                        if ("".Equals(newSecondaryToDMACode))
+                        {
+                            newSecondaryToDMACode = deviceCodeTemp;
+                        }
+                        else
+                        {
 
-                    //        newSecondaryToDMACode = newSecondaryToDMACode + "," + deviceCodeTemp;
-                    //    }
-                    //}
+                            newSecondaryToDMACode = newSecondaryToDMACode + "," + deviceCodeTemp;
+                        }
+                    }
 
                     // 删除数据
                     string deleteSql = "DELETE FROM [dbo].[二供通用泵站] where 更新时间 = '" + id + "' and 编码 = '" + deviceCode + "'";
                     dbHelper.ExecuteNonQuery(deleteSql);
-                //}
+                }
                 if ("1".Equals(Constants.SecondaryToDMA))
                 {
                     UpdateAppConfig("SecondaryToDMACode", newSecondaryToDMACode);